Remove The Base Assembly For Vesa Mounting - Philips 241E9 User Manual

2. Setting up the monitor
Resolution notification
This monitor is designed for optimal
performance at its native resolution,
1920×1080@60Hz. When the monitor
is powered on at a different resolution,
an alert is displayed on screen: Use
1920×1080@60Hz for best results.
Display of the native resolution alert can
be switched off from Setup in the OSD
(On Screen Display) menu.
Physical Function
Tilt
20°
-5°
2.3 Remove the Base Assembly
for VESA Mounting
Remove the Base Stand
Before you start disassembling the
monitor base, please follow the
instructions below to avoid any possible
damage or injury.
1. Place the monitor face down on a
smooth surface, taking care to avoid
scratching or damaging the screen.
2. Use your fingers to loosen the screw
located at the bottom of the base,
and remove the base from the
stand.
3. Remove the hinge cover from
monitor body by using your fingers.
8