Harman AMX Enova AVX-400 Quick Start Manual

Overview
The Enova AVX-400 Twisted Pair Presentation Switcher (FG1350-01) is a four input,
multi-format active presentation switcher with auxiliary line level audio input. The
AVX-400 (FIG. 1) is a twisted pair switcher with basic projector/display control via
RS-232, but with external control of the switcher via RS-232 or AxLink. This
presentation switcher incorporates the following:
• External serial or AxLink control
• Projector or display control via RS-232
• Integrated multi-format Cat5 audio/video switcher
• Audio mixer with an auxiliary line input facility
• Audio volume and tone control
• Built-in audio amplifier
For more information, consult the Enova AVX-400 Twisted Pair Presentation Switcher
Operation/Reference Guide available at www.amx.com.
ENOVA AVX-400 TWISTED PAIR PRESENTATION SWITCHER (FRONT PANEL)
FIG. 1
The following table lists the specifications for the AVX-400 Twisted Pair Presentation
Switcher:
AVX-400 TWISTED PAIR PRESENTATION SWITCHER SPECIF ICATIONS
Power: 12VDC, 4.5A supply
Audio Amplifier: Stereo 10W per channel with 7-band graphic equalization
Enclosure: Metal with black matte finish
Front Panel Components:
Source Select Button 1 button for toggling through the 4 inputs with each press
Source Select LED 4 LED indicators which show which source has been selected
Indicators
Source Inputs 4 RJ-45 connectors for source audio and video
(INPUTS 1-4)
LINE IN Auxiliary 1 3.5mm Phoenix (5-pin) connector for use with external audio
Audio Input equipment such as radio microphones and mixers.
AxLink DEVICE DIP 1 set of 8 DIP switches for setting the address of an AxLink device
Switches
AxLink Port 1 3.5mm Phoenix (4-pin) connector that provides data to external
control devices and allows the AVX-400 to be controlled from a
Master. A green AxLink LED indicates the state of the AxLink port.
RS-232 Control Port 1 3.5mm Phoenix (3-pin) connector that provides data to external
control devices
Configuration Port 1 type-B USB connector for configuring the switcher via AMX DCS
(PROG) software
Power Connector 1 3.5mm Phoenix (2-pin) connector
Rear Panel Components:
RS-232 Display 1 male DB9 connector used to control a projector or display from
Control the AVX-400
Audio Amplifier 1 5.0mm Phoenix (4-pin) connector capable of delivering 2x10W
Output into 8 ohm variable stereo audio amplifier.
Line Level Audio 1 3.5mm Phoenix (5-pin) connector provides the mixed audio at
Output Line Level
Composite Output 1 RCA (Y) connector for connecting to a display device
VGA/RGB Output 1 HD-15 connector for connecting to a display device.
Component Output 1 HD-15 connector for connecting to a display device. You can use
breakout cable CC-HD15M-RCA3M (FG10-2170-03) to connect to
3 x RCA Phono Sockets.
Operating Storage Temperature: -10º C to 70º C (14º F to 158º F)
Environment:
Operating Temperature: 0º C to 40º C (32º F to 104º F)
Operating Relative Humidity: 5% to 85% non-condensing
Certifications: FCC Class B, CE, and IEC60950
Dimensions (HWD): 1.75" (4.45cm) x 9" (22.86cm) x 6" (15.24cm) HWD
Weight: 2.57 lbs (1.17 kg)
Certifications: FCC Class B, CE, and IEC60950
Enova AVX-400
AVX-400 TWISTED PAIR PRESENTATION SWITCHER SPECIF ICATIONS (CONT.)
Included Accessories:
Optional Accessories:
Wiring and Connections
The Source inputs (FIG. 2) can accept video from devices such as PCs, DVD players,
satellite receivers, and video conference systems via Cat5 wallplates. You can use the
Source Input ports to connect RJ-45 cables to the port on a wall input plate which then
connects to an input device via composite, component, or RGB/VGA connector. The LED
beside each port lights red when its associated port is active.
FIG. 2 FRONT PANEL SOURCE INPUTS
When connecting to a wall input plate, use Cat5/5e/6 cable to connect from the source
input on the switcher to the RJ-45 connector on the wall input plate (FIG. 3).
FIG. 3 WALL INPUT PLATE RJ-45 CONNECTOR
Warning: DO NOT use Cat5 crossover cable for source input connections. Using Cat5
crossover cable may damage the presentation switcher.
Once connected, you can activate the connected source input by pressing the button
on the front of the wall input plate. See
Note: Extended Display Identif ication Data (EDID) is not passed by the AVX-400.
HD-15 Output Connectors
Each AVX-400 has two HD-15 output connectors. The outputs enable you to use an
HD-15 to Component or standard VGA cable to send video to a display device such as a
projector or large screen monitor.
RS-232 Display Control
The RS-232 display control connector is used for controlling the switcher from an
RS-232 device such as a projector or large screen LCD. FIG. 4 shows the connector
pinouts for the rear RS-232 display control connector.
1 2 3 4 5
Continued
6 7 8 9
FIG. 4 RS-232 DB9 (MALE) CONNECTOR PINOUTS FOR THE REAR DISPLAY CONTROL CONNECTOR
QUICK START GUIDE
Twisted Pair Presentation Switcher
• 2 5-pin 3.5mm Phoenix connectors, for line-in/out
• 1 4-pin 3.5mm Phoenix connector, for AxLink
• 2 2-pin 5mm Phoenix connectors, for speakers
• 1 RS-232 3-pin 3.5mm Phoenix connector
• 1 PSR.4.4, 13.5 VDC, 4.5 A Power Supply with 3.5mm Phoenix
Connector with Retention Screws (FG423-46)
• Enova AVX-400 Twisted Pair Presentation Switcher Installation
Guide (93-1350-01)
• 1 Suppression Ferrite
• UPX-HDMI+A-DE HDMI Pass Through Universal Transmitter
Decor Style Wallplate (US) (FG1402-53-DW/DB)
• UPX-CS+A-DE Composite Universal Transmitter Decor Style
Wallplate (US) (FG1402-50-DW/DB)
• UPX-CS+A-UK Composite Universal Transmitter Wallplate (UK)
(FG1402-50-KW/KB/KA)
• UPX-CS+A-EU Composite Universal Transmitter Wallplate (EU)
(FG1402-50-EW/EB/EA)
• UPX-RGB+A-DE RGB Universal Transmitter Decor Style Wallplate
(US) (FG1402-51-DW/DB)
• UPX-RGB+A-UK RGB Universal Transmitter Wallplate (UK)
(FG1402-51-KW/KB/KA)
• UPX-RGB+A-EU RGB Universal Transmitter Wallplate (EU)
(FG1402-51-EW/EB/EA)
• UPX-CN+A-DE Component Universal Transmitter Decor Style
Wallplate (US) (FG1402-52-DW/DB)
• UPX-CN+A-UK Component Universal Transmitter Wallplate (UK)
(FG1402-52-KW/KB/KA)
• UPX-CN+A-EU Component Universal Transmitter Wallplate (EU)
(FG1402-52-EW/EB/EA)
• AC-SMB Surface Mounting Bracket (FG525)
• CC-HD15 Male to HD-15 Male cable (FG10-2170-01)
• CC-HD15 Male to 3 RCA3 Male cable (FG10-2170-03)
Wall input plate RJ-45 connector
for more information.
Switching Mode
RS-232 pinouts (male connector)
Pin 2: RX signal
Pin 3: TX signal
Pin 5: GND