www.intertec.info Table of contents 1 Use ................................... 3 2 Explanation of symbols for warnings and signal words .................. 3 3 Installation Instructions ............................ 3 4 Device Description .............................. 3 5 Technical Data ................................ 3 6 Installation................................ 4 7 Connection................................ 4 8 Test software and setup software.........................
The TC D... is delivered with the index "J" and can be INFO switched together on site with the heating source to be regulated. It is equipped with an external sensor -index Important notes and useful additional information.
Operating Instructions Temperature Controller TC D At higher temperatures, the controller must no longer be Permitted operating voltage max. 275 V AC impinged with full power. Rated current (in compliance max. 10 A with VDE 0298) Room Imax 120 V AC...
Operating Instructions Temperature Controller TC D In the case of failure of the temperature controller or performance fluctuations, please check the operating conditions. See also: Installation [}Page 4]. If the device is defective, it must be removed and sent Ground back to the manufacturer for repair.
Operating Instructions Temperature Controller TC D manufacturer, INTERTEC-Hess GmbH, INTERTEC-Hess GmbH Raffineriestrasse 8, 93333 Neustadt/Donau, Germany, Raffineriestr. 8 hereby declares in sole responsibility that the product 93333 Neustadt/Donau Product / Type designation: Germany TC D Phone: +49 9445 9532-0...
Need help?
Do you have a question about the TC D and is the answer not in the manual?
Questions and answers