Table of Contents
Advertisement
If you get an error with OSX security preferences, locate the app in Finder, right-
click on the app file and choose "Open" to allow the app to run.
6. Run LaserOS installer
and follow instructions
carefully. You will need to
accept the License
Agreement to use the app.
After the installation is
complete, look for the
LaserOS icon and launch
the program.
7. The LaserOS app will detect if the ML-1000 is connected. It can then be turned
on or off from the power menu in the top left corner of the app. Pressing the ESC
key will also turn off the laser.
Note: While securing
projector aiming, turn off
the unit and remove the
key. Check for the
proper beam block
setting. Repeat until
beam block prevents any
scanning into audience
areas.
Advertisement
Table of Contents
