Page 1
Model#: SP5977 / SP5978 USER MANUAL Please carefully check the unit and make sure there is no damage when you open the carton. QUESTIONS, PROBLEMS, OR MISSING PARTS? Please Contact Customer Service Before Returning to Store www.soupro.com servicespi@sourceproinc.com +1-844-455-4621 Keep this manual for future reference...
Table of Contents • GENERAL INFORMATION Package Contents Safety Instructions Warranty • ASSEMBLY INSTRUCTIONS Preparation Assembly • FIREBOX OPERATIONS FCC/IC Information Safety Information Operating Instructions Care And Maintenance Troubleshooting Package Contents Fireplace Mantel Firebox Remote Control SP5977 SP18-1705-LED...
Safety Instructions Please read and understand this entire manual before attempting to assemble, operate or install the product. IMPORTANT NOTICE When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: WARNING: Place this unit in a location that avoids direct sunlight and high temperatures.
Warranty 1-YEAR LIMITED WARRANTY Soupro Limited Inc. (hereinafter referred to collectively as “the Company”) warrants that your new BOLDFLAME Electric Fireplace is free from manufacturing and materials defects for a period of one (1) year from date of purchase. Subject to the following conditions and limitations: The electric fireplace must be installed and operated at all times in accordance with the installation and operating instructions furnished with the product.
Preparation IMPORTANT INFORMATION 1. Before you begin, locate the instructions and hardware. Be sure you have all of the parts and can identify them. 2. To avoid scratching the finish, assemble the product on a soft, non-abrasive surface such as carpet or cardboard.
Assembly Do not fully tighten screws during assembly. Only tighten when all parts are installed in place. BB x 23 EE x 23...
Page 8
Assembly Do not fully tighten screws during assembly. Only tighten when all parts are installed in place. BB x 4...
Page 9
Assembly Do not fully tighten screws during assembly. Only tighten when all parts are installed in place. BB x 1 QQ x 6 II x 4...
Page 10
Assembly Do not fully tighten screws during assembly. Only tighten when all parts are installed in place. BB x 4 STEP:5a STEP:5b STEP:5c...
Page 11
Assembly Do not fully tighten screws during assembly. Only tighten when all parts are installed in place. BB x 10 BB x 4 PP x 1 JJ x 2...
Page 12
Assembly Do not fully tighten screws during assembly. Only tighten when all parts are installed in place. CC x 32 RR x 2 STEP:11a STEP:11b...
Page 13
Assembly Do not fully tighten screws during assembly. Only tighten when all parts are installed in place. AA x 8...
Page 14
Assembly Do not fully tighten screws during assembly. Only tighten when all parts are installed in place. SS x 6 KK x 2 LL x 2 MM x 2 NN x 4 OO x 2 WARNING: • If installing the mantel on drywall or other hollow wall applications, the safety mounting tape (KK) must be fastened to studs, headers, or other structural wall members.
Page 15
Firebox Model SP1816-HE-FGPB ATTENTION: • Find a location for the firebox that is protected from direct sunlight. • Failure to read all instructions may result in a possible electric shock, fire hazard and/or injury and will void the warranty. WARNING: •...
Safety Information Use this firebox only as described in the manual. Any other use is NOT recommended by the manufacturer and may cause fire, electric shock or injury to persons. CAUTION: • If possible, ALWAYS unplug this firebox when not in use. •...
Operating Instructions TEMPERATURE HEATER FLAME POWER TO ACCESS CONTROL PANEL • Control panel can be accessed at upper-right corner of insert. POWER • The POWER switch supplies power to all of the functions of the fireplace. HEATER • Your fireplace consists of a fan forced wire element heater. The HEATER switch turns the heater ON and OFF. FLAME • FLAME button adjusts the flame effect brightness. Press this button to dims the flame effect light untill turn it OFF. TEMPERATURE • The temperature control knob regulate the temperature level of the heater. The further of knob is rotated clockwise, the higher of set point temperature. Turning the knob counter clockwise will lower of set point temperature. Use this function to help regulate the ambient temperature level.
Care And Maintenance CLEANING INFORMATION: • Make sure the unit is turned off, unplugged and the heating elements of heater are cool whenever you are cleaning the heater. • Clean the metal trim using a water-dampened, soft, and clean cloth. DO NOT use brass polish or household cleaners as these products will damage the metal trim.
Care And Maintenance DISPOSAL OF USED BATTERY: A battery may contain hazardous substances that could be endangering to the environment and human health. • This symbol marked on the battery and/or packaging indicates that used battery shall not be treated as municipal waste. Instead it shall be left at the appropriate collection point for recycling. •...
Page 20
QUESTIONS, PROBLEMS, OR MISSING PARTS? Please Contact Customer Service Before Returning to Store www.soupro.com servicespi@sourceproinc.com +1-844-455-4621 Crafted in China Ver. 1 Distributed by Source Pro Industries Ltd., Workshop 15 & 18 , 10/F Metro Centre, No.32 Lam Hing Street, Kowloon Bay, Hong Kong...
Need help?
Do you have a question about the SP5977 and is the answer not in the manual?
Questions and answers