Safety Notice - Jensen CR271ML Installation & Owner's Manual

Safety Notice

Video / movie playback will not operate while the vehicle is moving. This is a
safety feature to prevent driver distraction. In-dash video / movie functions will
only operate when vehicle is in Park and the parking brake is engaged. It is illegal
in most jurisdictions for the driver to view video while the vehicle is in motion.
The SAFETY NOTICE is reminder to drive responsibly and safely while using your mobile
phone device, or any APP's that are compatible with this unit.
It is highly recommended that your JENSEN CR271ML is installed by a professional installer
or an authorized dealer.
This product is only for use in vehicles with 12VDC negative ground only.
To prevent damage or injury:
• Make sure to ground the unit securely to the vehicle chassis ground.
• Do not remove the top or bottom covers of the unit.
• Do not install the unit in a spot exposed to direct sunlight or excessive heat or the
possibility of water splashing.
• Do not subject the unit to excessive shock.
• When replacing a fuse, only use a new one with the correct rating. Using a fuse with the
wrong rating may cause the unit to malfunction.
• To prevent short circuits when replacing a fuse, disconnect the wiring harness first.
• Use only the provided hardware and wire harness.
• If you experience problems during installation, consult your nearest JENSEN dealer.
• If the unit malfunctions, reset the unit as described. If the problem still persists, consult
your nearest JENSEN dealer or call tech assistance @ 1-888-921-4088.
• To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff
cloth, or solvents such as paint thinner and alcohol. They can scratch the surface of the
panel and/or remove the printing.
• When the temperature of the unit falls (as in winter), the liquid crystal inside the screen
will become darker than usual. Normal brightness will return after the unit is in use for a
while.
• When extending the ignition, battery or ground wiring, make sure to use automotive-grade
wiring with an a minimum AWG 16 or more to prevent voltage drops.
• Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal
fluid may be hazardous to your health or fatal. If the liquid crystal fluid from the LCD
contacts your body or clothing, wash it off with soap immediately.
CR271ML INFORMATION
3