Page 3
English H: ECO key ELEMENTS OF THE MONITOR.- A: This display gives a simultaneous START/STOPING.- readout of Time; Programs; Speed; Plug the unit into a wall socket with an Distance; Incline; Pulse rate and EARTH terminal and set switch (L) to Calories.
To change from km/h to mph follow on the display, by pressing the these steps: PROGRAM key you can access the Unplug the machine from the mains programs (P1 al P12: BODY-FAT), supply, remove the safety key. Plug once you have chosen a program the machine back in.
t the inclination level you want for the FAT. (Body fat).– first stage (between 0 to 12), press the The body fat function helps you to SPEED keys to select the speed that calculate your body fat percentage. you want for the first stage between 1 and 16 km/h).
Remove the safety key (g) whenever IMPORTANT: INCLINATION LEVEL MUST BE AT ITS LOWEST the machine is not being used and keep it out of children’s reach. Pressing the SETTING BEFORE ATTEMPTING red button marked STOP will also stop TO PUT THE TREADMILL INTO THE the unit immediately.
Page 7
FAULT FINDING CHART PROBLEM CHECKS SOLUTIONS 1.The monitor does not 1) Make sure that the 1) Plug the machine into the switch on. machine is plugged in, the mains supply. Set the switch to ON/OFF switch in position 1 position 1 and insert the safety and that the safety key is key.
Page 8
PERFILES DE LOS PROGRAMAS; (GB) PROGRAM PROFILES; PROFILS DES PROGRAMMES; PROGRAMMPROFILE; PERFIS DOS PROGRAMAS; PROFILI DEI PROGRAMMI; (NL) PROGRAMMAPROFIELEN;...
Page 10
Tel.: +351 234 729 510 902 170 258 Fax: +351 234 729 519 Fax: +34 945 56 05 27 e-mail: info@bhfitness.pt e-mail: sat@bhfitness.com BH FITNESS NORTH AMERICA BH FITNESS MEXICO BH FITNESS UK 20155 Ellipse BH Exercycle de México S.A. de Tel: 02037347554...
Need help?
Do you have a question about the G6485 and is the answer not in the manual?
Questions and answers