Frequency Setting; Working Mode Setting - Marktrace MR6121E User Manual

◢MR6121E UHF reader user manual（Ver 1.0）◣
18
RF Power on Power setting; Query and set Antenna on Antennas Setting. Take
below image for the reference.
2、Set the RF power separately from the range of 0 to 25dBm.
3、On the reader connection, the antenna port will begin self detection, and the
connecting Antenna port is on GREEN ICON, Disconnecting Antenna port is
on RED ICON. Only the selected GREEN ICON port's antenna works.
4、On Integrated RFID reader and Desktop RFID reader, config and set one
antenna port for the reader to work.

5.2.3 Frequency Setting

On MR6100Demo.exe software's Setting interface, Query Reader's
Frequency on Frequency setting menu, North America Frequency
(902-928MHz). Take below images for the reference.

5.2.4 Working Mode Setting.

1、On setting interface's Working Mode Setting, there are two working mode,
Favor speed and Favor quantity for the query and setting, take below image for
the reference.
Address：
Floor 3/5, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
R.C.
Post：518057
Phone：0755-2654 6392 FAX：0755-2655 3743
E-mail：technical@marktrace.com Website：www.marktrace.com