Table of Contents
Advertisement
Common
Possible Reasons
Malfunction
In booting priority of
the BIOS setting,
Boot device
the device is not the
not found
first priority or the
device is not include
in the booting device
The HDD power
cable or data cable
is not connected
No system
disk can be
well
found when
System files on the
powering on
hard disk are
damaged
Plug and
play I/O card,
no I/O card is
detected, or
Poor contact of the
I/O card can
slot
be used
when used
again
Trouble shooting and solution
Modify the booting priority of the device in the
Boot menu of BIOS setting or include that device
into the booting priority
Check whether the power cable and the data
cable of the hard disk(the hard disk shall be
installed with operating system and is bootable)
are well connected
Enter the system(usually WinPE system) with a
bootable disk check whether the system in the
hard disk is damaged. Reinstall the system if
necessary.
Poor contact is usually caused by frequent
installation/ uninstallation of the PCI or ISA card,
unstable fixing or improper dust-proof
measures;
please remove and install the card
for a few times or use another slot.
- 21 -
Advertisement
Table of Contents
