Nokia TA-1257 Get Started

Get Started
Nokia xx
TA-1257

Setting up your phone

Your phone already has a SIM card installed
Optional: Insert the microSD card
1. Open the SIM card tray: push the tray opener pin
in the tray hole and slide the tray out.
2. Place the microSD card into the microSD card slot
with the gold contacts facing down.
3. Slide the tray back in.
Note: The microSD card is sold separately.
Use only compatible memory cards approved for
use with this device. Incompatible cards may dam-
age the card and the device and corrupt data stored
on the card.
Important: Do not remove the memory card
when an app is using it. Doing so may damage the
memory card and the device and corrupt data
stored on the card.
Camera
NFC area
Headset
connector
Microphone
Loudspeaker
EN
Flash
Shortcut key
USB connector
Front camera
Microphone
Earpiece
Proximity sensor
SIM and memory
card slot
Volume keys
Power/Lock key/
Fingerprint sensor

Charging your phone

Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone sup-
ports the USB-C cable.
USB-C USB micro-B
If the battery is completely discharged, it may take
several minutes before the charging indicator is dis-
played.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides you
through the setup.
If you have backed up your old phone's contents to
your Google account, you can copy them to your
new phone: tap Settings > Accounts > Add account
> Google, enter your account details, and select
which data you want to restore on your new phone.
The content sync starts automatically once your
phone is connected to the internet.
To lock the phone, press the Power/Lock key. To
unlock, press the key again and enter your creden-
tials, if asked.