Table of Contents
Advertisement
If you are using a cable or satellite set-top box, you can attach the remote sensor control to the set-top box, which enables
you to control the set-top box with the remote commander.
To connect the remote sensor control
1
Plug the cable from the remote sensor control (1) into either jack (1 or 2) on the back of the remote sensor (2).
2
Remove the adhesive tape cover from the bottom of the remote sensor control (1).
3
Attach the remote sensor control (1) onto the set-top box (3) near the infrared sensor (4).
n
60
N
Using Your VAIO Computer
Advertisement
Table of Contents
