Sony VGN-A160 VAIO User Guide (primary manual) User Manual page 93

Playing CDs
Before you play an audio CD, you may need to enable your computer's audio feature.
To enable the audio feature
1.
Click Start on the Windows
The System Properties dialog box appears.
As a shortcut, you can press Fn + Windows key
2.
Select the Hardware tab, and in the Device Manager box, click Device Manager. A window with a listing of the
computer's hardware devices appears.
3. Double-click the optical drive device to open the submenu.
4.
Double-click the listed drive, and select the Properties tab.
5.
Click to select the Enable digital CD audio for this CD-ROM device check box if it is not already selected.
6.
Click OK.
To adjust the volume for playing CDs and DVDs
Some programs have built-in volume controls, which you can adjust. If there are no volume controls, then adjust the volume
of your computer's built-in speakers by using the Volume buttons, which are located above the keyboard.

Press the left Volume button to decrease the volume.

Press the right Volume button to increase the volume.
An on-screen display may appear, notifying you when a change occurs.
 Use the Volume icon.
1.
Double click the Volume icon
2.
In the Volume Control and Wave columns, move the Volume sliders up to increase volume and down to
decrease volume.
To play an audio CD
1.
Insert the disc into the optical drive.
2.
If nothing appears on the desktop once you insert an audio CD disc, then click Start, point to All Programs, and
click to open a CD program, such as SonicStage
If the Audio CD window appears, click to select an option.
Audio CD
taskbar, and then click Control Panel, Performance and Maintenance, and System.
®
on the Taskbar Notification area. The Volume Control dialog box appears.
software.
®
+ Insert to open the System Properties dialog box.
Page 93