Table of Contents
Advertisement
What do I do if the message "Operating system not found" appears when my computer starts, and why
won't Windows start?
Make sure the computer does not have a "non-bootable" floppy disk in the floppy disk drive (if applicable).
If a non-bootable floppy disk is in the drive:
1.
Remove the floppy disk.
2.
Restart the computer and confirm that the Microsoft
If the Windows operating system still does not start, follow these steps to initialize the BIOS:
1.
If there is a disk in the floppy disk drive, then remove it.
2.
Turn off the computer.
3.
Remove any peripheral devices connected to the computer.
4.
Restart the computer.
5.
Press the F2 key when the Sony logo appears. The BIOS Setup window appears.
6.
Press the Right Arrow key
7.
Press the Down Arrow key
values. appears.
8.
Press the Enter key. The Load Optimal Defaults? window appears.
9.
Select Ok, and press Enter.
10. Select Exit (Save Changes), and press Enter. The Save configuration changes and exit setup? window
appears.
11. Select OK, and press Enter. The computer restarts.
Windows
®
to select the Exit menu.
to select Get Default Values. The message Load factory default
operating system starts properly.
®
Page 224
Advertisement
Table of Contents
