Page 1
EX-Supplementary Operating Manual for Hazardous areas Safety Instructions This operating manual is a supplement to the manuals for the Flow-meters KDS und BGK. Please read the instructions carefully and store them in a safe place. Heinrichs Messtechnik GmbH EX-Supplementary Operating Manual KDSE January 2021...
Returning the device for repairs or servicing Note: According to German waste disposal legislation, it is the owner’s or customer’s responsibility to dispose of hazardous waste. Thus, before any devices are returned to Heinrichs Messtechnik for servicing or repairs the following measures must be performed: ...
Heinrichs Messtechnik GmbH accepts no liability for any loss or damage of any kind arising from improper operation of any product, improper handling or use of any replacement part, or from external electrical or mechanical effects, overvoltage or lightning.
The manufacturer accepts no responsibility in regard to such material and housing. Caution: In order for the device to perform correctly and safely, it must be shipped, stored, set up, mounted operated and maintained properly. Ex- Supplement operating manual KDSE Page 5 of 14...
The microprocessor controlled KDSE transmitter is used in flowmeters series KDS and BGK. The position of the float is transmitted to the pointer axle by means of a magnetic system. The KDSE measures the field of a mag- net mounted on the pointers axle and generates an output current of 4 to 20 mA from it.
Max. surface temperature for use in EPL Db 135 °C When used in potentially explosive dust atmospheres, the device must be cleaned regularly in order to avoid deposits exceeding 5 mm. Ex- Supplement operating manual KDSE Page 9 of 14...
7. Special conditions for safe use Environmental influences on the electronics Environmental influences on the built-in transmitter type KDSE how the process temperature must be taken into account. See Chapter 14 of the general operating instructions for the meter type or KDS BGK.
Only devices with ex marking may be operated within the explosive atmospheres range. The electronic module is marked as follows: When the module is assembled in a variable area flow meter is additional a mark on the scale of the device. Ex- Supplement operating manual KDSE Page 11 of 14...
Need help?
Do you have a question about the KDSE and is the answer not in the manual?
Questions and answers