JVC KD-X176 Instruction Manual page 17

Audio Settings
[PRO EQ] Adjusts your own sound settings for each source.
• The settings are stored to [USER] in [PRESET EQ].
• The settings made may affect the current settings of [EASY EQ].
1 [BASS]/[MIDDLE]/[TREBLE]: Select a sound tone.
2 Adjust the sound elements of the selected sound tone.
[BASS] Frequency :
Level
Q
(Default
[MIDDLE] Frequency :
Level
Q
(Default
[TREBLE] Frequency :
Level
Q
(Default
[AUDIO CONTROL]
[BASS BOOST] [LEVEL +01] to [LEVEL +05] ([LEVEL +01]): Selects your preferred bass
boost level. ; [OFF]: Cancels.
[LOUDNESS] [LEVEL 01]/[LEVEL 02]: Boosts low or high frequencies to produce a well-
balanced sound at low volume. ; [OFF]: Cancels.
[SUB.W [SPK-OUT]*2 [SUB.W 00] to [SUB.W +06] ([SUB.W +03]): Adjusts the
LEVEL]*1 output level of the subwoofer connected via speaker lead.
(Page 12)
[PRE-OUT]*3 [SUB.W –08] to [SUB.W +08] ([SUB.W 00]): Adjusts
the output level of the subwoofer connected to the lineout
terminals (REAR/SW) through an external amplifier.
(Page 12)
[60HZ]/[80HZ]/[100HZ]/[200HZ]
: [LVL–06] to [LVL+06]
: [Q1.0]/[Q1.25]/[Q1.5]/[Q2.0]
: [80HZ]/[LVL 00]/[Q1.0])
[0.5KHZ]/[1.0KHZ]/[1.5KHZ]/[2.5KHZ]
: [LVL–06] to [LVL+06]
: [Q0.75]/[Q1.0]/[Q1.25]
: [1.0KHZ]/[LVL 00]/[Q1.25])
[10.0KHZ]/[12.5KHZ]/[15.0KHZ]/[17.5KHZ]
: [LVL–06] to [LVL+06]
: [Q FIX]
: [10.0KHZ]/[LVL 00]/[Q FIX])
[SUBWOOFER [ON]: Turns on the subwoofer output. ; [OFF]: Cancels.
SET]*3
[SUBWOOFER [FRQ THROUGH]: All signals are sent to the subwoofer. ;
LPF]*1 [FRQ 55HZ]/[FRQ 85HZ]/[FRQ 120HZ]: Audio signals with frequencies lower
than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
[SUB.W [REVERSE] (180°)/[NORMAL] (0°): Selects the phase of the subwoofer output
PHASE]*1*4 to be in line with the speaker output for optimum performance.
[FADER] [POSITION R06] to [POSITION F06] ([POSITION 00]): Adjusts the front and
rear speaker output balance.
[BALANCE]*5 [POSITION L06] to [POSITION R06] ([POSITION 00]): Adjusts the left and
right speaker output balance.
[VOLUME [LEVEL –15] to [LEVEL +06] ([LEVEL 00]): Presets the initial volume level of
ADJUST] each source by comparing to the FM volume level. (Before adjustment, select
the source you want to adjust. "VOL ADJ FIX" appears if FM is selected.)
[AMP GAIN] [LOW POWER]: Limits the maximum volume level to 25. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging the
speakers.) ; [HIGH POWER]: The maximum volume level is 35.
[D.T.EXPANDER] [ON]: Creates realistic sound by compensating the high-frequency
(Digital Track components and restoring the rise-time of the waveform that are lost in audio
Expander) data compression. ; [OFF]: Cancels.
[SPK/PRE OUT] Depending on the speaker connection method, select the appropriate setting
for the desired output. (See "Speaker output settings" on page 12.)
*1 Displayed only when [SUBWOOFER SET] is set to [ON].
*2 Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W]. (Page 12)
*3 Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or [SUB.W/SUB.W].
(Page 12)
*4 Selectable only if a setting other than [FRQ THROUGH] is selected for [SUBWOOFER LPF].
*5 This adjustment will not affect the subwoofer output.
11
ENGLISH