Confirming Added Memory Capacity - Sony PCG-Z1WAMP3 VAIO User Guide (primary manual) User Manual

Confirming Added Memory Capacity

After you've installed a new memory module, make sure the operating system recognizes it.
To check your system's memory
1. Turn on the computer.
2. Click Start on the Windows
3. Select Sony Notebook Setup from the submenu. The Sony Notebook Setup dialog box appears.
4.
On the About This Computer tab, make sure the System Memory displayed in the System Information box
matches the amount of memory installed.
The displayed memory size may be less than the installed memory due to the amount used by the display
adapter.
Sony Notebook Setup
taskbar, point to All Programs, and then point to Sony Notebook Setup.
®
Page 160