Advertisement
3
Install wheels to the under carriage and fasten with NUT J.
5
Pull out the handle of the trolley, slowly lift it up to 30 degree angle
until a click sound is heard, unit will automatically slide and is
locked to the trolley.
UNINSTALL the Trolley from Solar Generator 1800
1
UNIT FRONT SIDE
UNIT BACK SIDE
Place one hand underneath the bottom of unit, press down the
spring buckle and hold it to unlock the trolley.
3
Lift the unit up.
4
Place the unit on the trolley, make sure the unit is placed in the
middle of trolley and located approximately to the position
highlighted by red dotted line as shown above.
2
UNIT BACK SIDE
At the same time, use another hand to push the back of unit
forward.
Advertisement
