Table of Contents
Advertisement
Powering on your Eee PC
These are only quick instructions for using your Eee PC.
1. Install the battery pack
1
3. Turn ON the Eee PC
•
When you open the display panel, do not force it down to the
table or else the hinges may break! Never lift the Eee PC by the
display panel!
•
Only use battery packs and power adapters supplied with this
Eee PC or specifically approved by the manufacturer or retailer
for use with this model or else damage may occur to the Eee PC.
The output voltage of this adapter is +12Vdc, 3A.
•
Never attempt to remove the battery pack while the Eee PC is
turned ON, as this may result in the loss of working data.
Remember to fully charge the battery before first use and
whenever it is depleted to prolong battery life.
2-2
2. Connect the AC power
2
adapter
Damage may occur if you
use a different adapter
to power the Eee PC. You
may damage both your
battery pack(s) and the
Eee PC with a faulty AC-DC
adapter.
Chapter 2: Getting Started
Advertisement
Table of Contents
