Titan PC7095ME User Manual page 80

4) In manual mode: when burning need to strictly control the connection sequence: first equipment
need to shut down, disconnect USB connection, and then click on "Start USB1", followed by a
need to connect USB cable in a short period of time after at the same time to the MID electric (i.e.,
press the power button), will enter the download process.As shown in figure 16, if time control is
bad, can appear the connection fails, and other abnormalities, automatically terminate the
download.At this moment need to try a few times (note: try several means: equipment shutdown,
disconnect USB connection, and then click Start USB1, followed by a need to connect the USB
line in a short period of time after at the same time to the MID electricity).
5) In the window will appear download the log information of the record file to write the amount
of time. After the download is complete will appear similar to the following interface, means
download success. As shown in figure
80