Table of Contents
Advertisement
As above shown: hook the 12 files. Place the file psi_flash.fls on top.(hook "custom order
, Can put the 12 files from the new sorting, the psi_flash.fls files are placed in the
top.)
Note：
1.
You can click the hook on this place
files can be picked
2.
If you want to get rid of these 12 file to choose other upgrade files can click below
3.
Re-choose the right 12 upgrade file, if the original has been checked "Custom Order", you
need to remove the hook, Re-hook one again, The purpose is to put the 12 files from the new
sorting. The psi_flash fls files placed on the top)
Single-threaded download mode: configuration information needed is as follows: check the
"Custom Order", the corresponding select list using the default "Unconditional erase each area
before the write" (the default). "USB Port" Defaults to 1, "Baud Rate" choose "921600" biggest.
"# Channel" to ensure that is 1, "Communication Driver" choose "IMC USB Driver". set see
78
which all hooks of 12
Advertisement
Table of Contents
