Table of Contents
Advertisement
4
Using the Notebook PC
3. Hold the disc by the edge and face the disc's
printed side up. Push down on both sides of
the disc's center until the disc snaps onto the
hub. The hub should be higher than the
disc when correctly mounted.
It is normal to hear as well as feel the CD spinning with great intensity in the CD
drive while data is read.
Removing an optical disc
Eject the tray and gently pry the edge of the
disc upwards at an angle to remove the disc
from the hub.
40
4. Slowly push the drive's tray back in. The drive
will begin reading the table of contents (TOC)
on the disc. When the drive stops, the disc is
ready to be used.
Emergency eject
The emergency eject is located in a hole on the
optical drive and is used to eject the optical
drive tray in case the electronic eject does not
work. Do not use the emergency eject in place
of the electronic eject. Note: Make sure not to
stab the activity indicator located in the same
area.
Actual location will
vary by model�
Advertisement
Table of Contents
