Table of Contents
Advertisement
Right Side
Refer to the illustration below to identify the components on this side of the Notebook PC.
Headphone Output Jack
1
The stereo headphone jack (1/8 inch) is used to connect the Notebook PC's audio out signal to
amplified speakers or headphones. Using this jack automatically disables the built-in speakers.
Microphone Input Jack
2
The mono microphone jack (1/8 inch) can be used to connect an external microphone or out-
put signals from audio devices. Using this jack automatically disables the built-in microphone.
Use this feature for video conferencing, voice narrations, or simple audio recordings.
IEEE134 Port (on selected models)
3
IEEE1394 is a high speed serial bus like SCSI but has simple connections and hot-
plugging capabilities like USB. The interface IEEE1394 has a bandwidth of 100-400
Mbits/sec and can handle up to 63 units on the same bus. IEEE1394 is also used in
high-end digital equipment and should be marked "DV" for Digital Video port.
USB Port (2.0/1.1)
4
2.0
The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as
keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a
series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to
run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or
hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected
without restarting the computer.
Knowing the Parts
1
2
3
4
2
1
Advertisement
Table of Contents
