Dealing With Abnormalities; Maintenance And Inspection; Storage - Canon Cine-Servo Manual

DEALING WITH ABNORMALITIES

Warning
Should any of the abnormalities described below occur, immediately dismount the lens from the camera and contact
your Canon sales representative or dealer.

MAINTENANCE AND INSPECTION

Warning
Be sure to disconnect the cable and remove the lens from the camera before cleaning outside of the lens. Do not use
Note
wipe in a spiral pattern from the center of the lens. Be careful not to rub dust across the lens, which may scratch the
lens surface
2. Routine inspection about once a year is recommended, depending on the conditions and environment of use. Request
overhaul, if needed.

STORAGE

Caution
Always attach the lens cap, hood cap, dust cap or covers before storage. Storing the lens without the caps
Note
Immediately wipe off any moisture on the lens from misty or foggy environments, using a dry cloth. Seal the lens in
malfunction of the product.
E9
Introduction