Table of Contents
Advertisement
Picture and video settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Video], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[TV display]: Select a picture format to
•
fit the TV screen.
•
[HDMI video]: Select the resolution of
video signal that is output from HDMI
OUT (ARC) on your home theater.
To enjoy the selected resolution,
make sure that your TV supports the
selected resolution.
[HDMI Deep Color]: Recreate the
•
natural world on your TV screen by
displaying vivid images using billion
colors. Your home theater must be
connected to a Deep Color enabled
TV through an HDMI cable.
[Picture settings]: Select pre defined
•
color settings for the video display.
[Watch 3D video]: Set HDMI video to
•
support 3D or 2D video.
Note
If you change a setting, make sure that the
•
TV supports the new setting.
EN
26
Audio settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Audio], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Night mode]: For quiet listening,
•
decrease the volume of loud sounds
on your home theater. Night mode
is only available in DVDs and Blu-ray
discs with Dolby Digital, Dolby Digital
Plus, and Dolby True HD soundtracks.
[HDMI audio]: Set the HDMI audio
•
output from your TV.
[Speaker setup]: Set up speakers for
•
best surround sound experience.
[Default sound settings]: Restore
•
the equalizer settings of all the sound
modes to the default values.
Parental control settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Change password]: Set or change
•
your password for parental control
access. If you do not have a password
or have forgotten your password, enter
0000.
[Parental control]: Restrict access
•
to discs that are recorded with age
ratings. To play all discs, irrespective of
the ratings, select 8 or [Off].
Advertisement
Table of Contents
