HANNspree HS248PPB User Manual page 15

OSD V. Pos.
OSD Timer
Transparency
SYSTEM
Mode
Audio Volume
Audio Input
Signal Source
Aspect Ratio
Active Contrast
Over Drive
RESET
Reset
level.
Select 「OSD V. Pos.」option to adjust the vertical
position of the OSD. Enter the option and adjust the
level.
Select 「OSD TIMER」option to set the OSD time out
from 5 to 60 seconds. Enter the option and adjust the
level.
Select 「TRANSPARENCY」option to adjust the
transparency of the OSD. Enter the option and adjust the
level.
Select the mode according to your preference: PC/
GAME/ MOVIE/ECO
[The availability of this function depends upon the
selected model]
Select the 「VOLUME」option to change the volume
level. Enter the option and adjust the level. [This
function applies only to models with incorporated
audio.]
● By high volume, risk of hearing damage exists.
While transferring via the HDMI port, it is
recommended to set AUDIO INPUT to HDMI; if no
sound is outputted, it is recommended to select AUDIO
INPUT as PC, and make sure the PC audio output cable
is connected to monitor's LINE IN (or AUDIO IN) port.
Select the 「Signal Source」option to change between
analog (VGA) or Display (HDMI or DP) source. Enter
the option and select Analog or Display.
key to change to 「16:9」 「AUTO」 「4:3」
Select the 「Active Contrast」option to switch the
function On or Off. [Dual input mode optional]
Select the 「Over Drive」 option to switch the function On
or Off. [The availability of this function depends upon
the selected model]
Select the 「RESET」option to reset to the monitor's
default setting. This will erase the current settings.
15
User's Manual