Advertisement
■ Map and GPS Function
Symptom
AUTO-GPS
• Check if the AUTO-GPS
service
function is deactivated due
information
to low battery power.
cannot be
• Check if the AUTO-GPS
set.
function is deactivated
due to low battery power.
If the AUTO-GPS function
is deactivated by the "Low-
power operation settings",
the AUTO-GPS service
information cannot be
set. In that case, change
the "Low-power operation
settings" to "Not suspend"
or charge the battery to set
it. → P209
• Check if the AUTO-GPS
operation setting is turned
OFF. → P209
Appendix/Index
262
Check item
E rror Message
Error Message
No SIM card
The docomo nano UIM
card is not working
properly. If the problem
is not resolved
by removing and
reinserting the docomo
nano UIM card, contact
"Repairs" (in Japanese
only) on the back cover
of this manual.
No service
You cannot use this
terminal because it is
out of the service area
or it is in a place where
there is no signal
reception. Move to a
location where you can
get signal reception.
PIN1 code blocked
Enter your PIN unblocking
Enter PUK
key correctly. → P215
Description
Advertisement
