Troubleshooting The Printer - Sony PCG-SR33 Primary User Manual

Troubleshooting the Printer

I cannot print
❑
The default setting for the printer port mode is correct for most printers. If
you cannot print, try changing the printer port mode. In Sony Notebook
Setup, select the Printer tab. If the printer port mode is set to ECP, change it
to bi-directional. If the printer port mode is set to bi-directional, change it to
ECP. See "Displaying the Sony Notebook Setup Screen" for details on using
Sony Notebook Setup.
❑
Your connected printer may not function after the notebook resumes from a
power saving mode. If this occurs, proceed as follows to reset the printer
connection:
❑
Windows
1 Right-click My Computer icon on the desktop and select Properties.
2 Click the Device Manager tab.
3 Select Refresh, then click OK. The printer should function properly.
❑
Windows
1 Click My Computer icon on the desktop, then click on the
Control Panel folder.
2 Click on the Printers folder.
3 Right-click on the icon of the printer that is malfunctioning, then
select Properties to access the Properties window.
4 Click OK to close the Properties window. The printer should
function properly.
®
Me Only
®
2000 Only
Troubleshooting the Printer
129