Table of Contents
Advertisement
Installation and connection
en
The dryer is levelled using the
■
threaded feet.
Check the alignment of the
Note:
appliance with a spirit level and
correct if necessary. Change the
height by turning the appliance feet.
All appliance feet must stand firmly
on the ground.
Incorrect alignment may cause high
noise levels, vibrations and improper
movement of the drum.
If in doubt, have the appliance
Note:
connected by a specialist.
Changing the condensation
drain
The condensation from the dryer
Note:
can either be discharged into the
condensation container or drained off
via a connection to the waste-water
system. By default, the condensation
from the dryer is discharged into the
condensation container.
Proceed as follows to change the
condensation drain:
Remove the accessories from the
1.
dryer drum.
14
When the dryer is delivered from the
2.
factory, the hose for discharging the
condensation into the condensation
container is fastened to the
connecting piece.
Disconnect the hose from the
3.
connecting piece and put it in the
"parked" position.
Take the drain hose from the
4.
accessories and secure it to the free
connecting piece.
Push the drain hose into the hose
guide.
Advertisement
Table of Contents
