Sony PCG-R505GCP VAIO User Manual page 145

To install a memory module
1.
Remove the existing memory module from the computer. See
2.
Remove the new memory module from its packaging, and install the memory module by sliding it into the open
slot at a 45-degree angle.
Do not touch any part of the motherboard or the other components inside the computer.
Installing a New Mem ory Module
3.
Snap the connectors into place when the board is correctly seated, and close the computer cover.
4.
Replace the fastening screws on the bottom of the computer.
5. Make sure the system memory matches the amount of installed memory. See
for more information.
To remove a memory module
Confirming added memory capacity
for more information.
Page 145