Connection Test; Setting Status - Philips 75PFL5603 User Manual

Proxy configuration
2
Use to select Proxy configuration, then press OK.
3
Use to select a setting, then press OK.
Network selection
Proxy setting
Wireless network setting Proxy address
IP configuration Proxy port
Proxy configuration
Do not use is selected for default settings.
If you need to change the proxy setting as instructed by your
internet service provider to set the designated proxy address
and port, select Use.
Do not use Does not use the proxy server.
Proxy
setting
Use Uses the proxy server.
Selects the number or word by using
*
Proxy address
Use
*
Proxy port
input numbers.
* Items can be selected only when Proxy setting is set to Use.
Note(s)
The range of input numbers for the port number is between 0 and 65535.
(If you enter a number larger than 65535, it will be regarded as 65535.)
For proxy port, the selected ports may be blocked and not be able to use
depending on your network environment.
If the proxy address is entered with blank only, proxy server setting will be
set to Do not use.
Do not use
Use
, then press OK.
or the NUMBER buttons to

Connection test

Perform the following steps to test your internet connection after you
have connected an Ethernet cable or entered network settings such
as IP address, DNS settings, etc. manually.
1
Use to select Connection test, then press OK.
Connection test will start automatically and the test result for
home network and internet will appear right after the
connection test finishes.
"Testing..." is displayed while the connection test is in progress.
Home network Internet
Pass Pass
Fail -
Pass Fail
If the connection test for internet passes, speed test will start
automatically.
2
Press OK to go to the list on network status confirmation screen.
Note(s)
If the connection test for both home network and internet pass, you are
ready to use Net TV or network upgrade functions using the internet without
making any additional settings.
If the connection test fails, check if the Ethernet cable is connected to this
TV properly or if you have entered all the required details for the wireless
LAN connection properly.

Setting status

You can check the status of network settings.
1
Use to select Setting status, then press OK.
Network setting list will be displayed.
MAC address of this unit will be displayed in the list.
42
Description
Connection test is successfully
completed.
Connection test for home
network failed. Check the
connection settings.
Connection test for internet
failed. Check the connection
settings.
Continued on next page.
.
English