Sony PCG-R505GCK Primary User Manual page 37

accommodates both 10BASE-T and 100BASE-TX Ethernet connections, with
data transfer speeds of between 10 and 100 Mbps, depending on the Ethernet
cable.
To set up an Ethernet LAN
1 Plug one end of the Ethernet cable into your computer's Ethernet port and
the other into the network connection.
Connecting an Ethernet Cable
2 Click Start, point to Settings, Control Panel, and click Internet Options.
The Internet Properties dialog box appears.
3 Click to open the Connections tab, and click LAN Settings near the bottom
of the page. The Local Area Network (LAN) Settings dialog box appears.
4 Click to select the Automatically detect settings check box.
5 Click to select the Use automatic configuration script, and type an address
in the Address box.
6 Click OK.
Network Connections
E t h e r n e t
p o r t
E t h e r n e t
c a b l e
37