Sony PCG-R505ESK VAIO User Guide (primary manual) User Manual page 64

VAIO® Computer User Guide
Connecting Monitor to the Computer
✍
You cannot use the monitor port on your computer when the docking station is
connected to the computer; however, you can use the monitor port on the docking
station.
To connect an external display to your docking station
1 Make sure the external display is plugged into an AC outlet.
2 Open the rear panel of the docking station, and locate the monitor port.
3 Plug the display cable into the monitor port.
4 Make sure the cable is connected to the external display.
5 Restart your computer.
6 Press the key combination Fn + F7 to change the display to monitor.
7 See the manual that came with your computer display for more information
on its installation and use.
64
Computer display
Display cable (optional)
Power cord