Troubleshooting the Mouse and Touchpad
My mouse does not work.
❑
If you are using an optional Sony PCGA-UMS1 series USB mouse, verify
that the mouse is plugged into the USB port. See "Connecting a USB
Device" for more information.
If you are still experiencing problems, use your supplied Driver Recovery
❑
CD to reinstall the mouse drivers. See "Using the Application Recovery
CD(s)" for more information.
My touchpad does not work properly.
You may have disabled the touchpad without connecting a mouse to the
❑
computer. To enable the touchpad:
1
Press the Windows key and use the arrow keys to select Programs. Press
the Enter key.
2
Use the arrow keys to select Sony Notebook Setup, and press the Enter
key
3
Select Sony Notebook Setup again, and press the Enter key.
4
Use the arrow keys to select the Touchpad tab, and press the Tab key to
select Enable Touchpad
5
Press the Enter key.
❑
Restart the computer to activate the touchpad again.
If your touchpad is interpreting a single tap as a double-click, adjust the
❑
button assignments. Follow these steps:
1
Press the Windows key and use the arrow keys to select Settings. Press
the Enter key.
2
Use the arrow keys to select Control Panel, and then press the Enter key.
3
Select Mouse, and then press the Enter key. The Mouse Properties
dialog box appears.
4
Make sure the Buttons tab is open, and change the button assignments in
the Mouse Properties dialog box.
Troubleshooting the Mouse and Touchpad
199