Advertisement
Troubleshooting
PROBLEM
POSSIBLE REASON
•
No indicator
Egg cooker is not connected to a
light
power source
•
The indicator
No water in the water vessel
light
corresponding
with the function
being used
flashes and
the cooker will
beep twice
continuously
before the egg
cooker turns off
automatically
•
The egg cooker
Thermal link issue
is operating, but
the water tank
does not heat up
after 30 minutes.
A beep will
sound
•
Egg has not
Egg size may be too large or small
cooked well
enough
•
The lid is not fitted properly
•
The egg cooker
Unit issue
cannot be
turned off by the
START/CANCEL
button
EASY SOLUTION
•
Ensure the power cord is connected
correctly and the power point is switched
on.
•
The egg cooker has overheated. Turn the
egg cooker off and unplug. Wait until
the egg cooker has cooled. Remove rack
and tray and slowly pour water out of the
water vessel and replace with fresh water.
Reassemble and retry.
•
Turn the egg cooker off and contact the
Breville Customer Service.
•
If the egg is underdone, leave the egg/s
inside the egg cooker for an extra minute
to achieve desired results. Do not turn
egg cooker on. The heated water in the
vessel will continue to cook the egg/s.
Do not leave for longer than 2 minutes.
•
Ensure the handles are aligned with the
recess and the lid is on correctly.
•
Turn the unit off at the power outlet and
unplug. Contact the Breville Customer
Service Centre.
15
Advertisement
