Assembly - HAMPTON BAY HD09999FRBRZC Use And Care Manual

Assembly

1
Preparing the unit for assembly
Carefully unpack all the parts. Protect the assembly surface
to avoid scratching the lamp or the assembly surface.
Pull out any excess power cord through the floor lamp base
(A) during all assembly steps to prevent the cord from
becoming twisted.
Thread the bottom tube (B) into the floor lamp base (A).
Thread the middle tube (C) into the bottom tube (B).
Thread the top tube (D) into the middle tube (C).
3
Installing the light bulb
Install light bulb (not included) into socket assembly (F).
Use one 150 watt 3-way type A bulb or CFL or
LED equivalent.
DO NOT EXCEED RECOMMENDED WATTAGE.
2
D
C
B
A
F
4
Installing the lamp body and socket
assembly
Thread the lamp body (E) into the top tube (D).
Thread socket assembly (F) into lamp body (E).
4
Installing the lamp shade
Pinch and insert the harp (G) into the harp tting on the socket
assembly (F).
Remove the nial (I) from the harp (G).
Place the shade (H) on the harp (G) and secure with the nial (I).
F
E
D
I
H
G
F