Table of Contents
Advertisement
Quick Links
My CrossWave® Cordless Multi-Surface Wet Dry Vac
has no suction | Support
•
Remove machine from docking station
•
To activate suction, press "Hard Floor" or "Rug" button on handle
•
If machine does not turn on, see
•
Remove dirty water tank by pressing down on the recessed button on the top of the tank
No Power Steps
Advertisement
Table of Contents
Related Manuals for Crosswave Cordless 2588F
Summary of Contents for Crosswave Cordless 2588F
- Page 1 My CrossWave® Cordless Multi-Surface Wet Dry Vac has no suction | Support • Remove machine from docking station • To activate suction, press "Hard Floor" or "Rug" button on handle • No Power Steps If machine does not turn on, see •...
- Page 2 • With the machine on and a floor type selected, feel for suction strength at the motor vents (on the upper portion of where the top of the dirty tank connects) BISSELL Authorized Service Center or Contact Us If no suction, visit a If suction is strong, continue troubleshooting •...
- Page 3 • Hand wash filter, screen, and float with warm water • Manually move the float up and down to ensure it moves freely and is not stuck in place • Replace filter (after it has dried) - be sure the edges are smooth and not folded over...
- Page 4 • Check for a black rubber gasket around the top portion of the dirty water tank If it is missing, a new dirty water tank should be ordered • After parts dry completely, reattach the tank • Angle the water tank back into the body of the machine bottom first - push tank in until it clicks Tank should NOT be loose or have any gaps when installed on machine •...
- Page 5 • Also clear debris from the suction pathway on the foot • Reattach the dirty tank and brush window and test for suction • If still no suction, contact us...
Need help?
Do you have a question about the Cordless 2588F and is the answer not in the manual?
Questions and answers