Table of Contents
Advertisement
The end of the drain hose
must always be ventilated ,
i.e. the inner diameter of the
drain pipe (min. 38 mm -
min. 1.5") must be larger
than the external diameter of
the drain hose.
5.Without the plastic hose guide, to a
sink spigot- Put the drain hose in the
spigot and tighten it with a clamp. Refer
to the illustration.
4. PRODUCT DESCRIPTION
4.1 Appliance overview
Worktop
1
Detergent dispenser
2
Control panel
3
Door handle
4
Rating plate
5
1
2
3
Make sure that the drain hose makes a
loop to prevent particles going into the
appliance from the sink.
6. Position the hose directly to a built-in
drain pipe in the room wall and tighten
it with a clamp.
4
5
6
7
Drain pump filter
6
Feet for levelling the appliance
7
Drain hose
8
Inlet hose connection
9
Mains cable
10
ENGLISH
8
9
10
11 12
9
Advertisement
Table of Contents
