3-4. Cutter Parts
3-5. Cutter Installation
1.
Open the top cover by
pressing the Cover Open
Buttons on both sides.
2.
Push the front cover piece
buttons inward to open.
3.
Lift/take off the front cover
piece according to the
direction shown in the photo.
29 Cutter Module
30 Screw (TAP 3*8) x 2pcs
[NOTE]: Please power off the printer before installing the
cutter module.
[NOTE]: Do not cut self-adhesive labels! The traces of
adhesive will pollute the rotary knife and impair
safe operation!
15