Set Up Fire Tv Stick Hardware - Amazon Fire TV User Manual

Set Up Fire TV Stick Hardware

After you unpack your Fire TV Stick, you need to connect it to your high-definition TV and set up the
remote.
Before you begin, find the two AAA batteries included with your remote.
Plug the small end of the USB power cord into your Fire TV Stick and the other end into the power
adapter. Then, plug the power adapter into a power source.
We recommend that you use the power adapter and plug it into a power outlet. Although some TVs have powered
USB ports, there may not be enough power for Fire TV Stick to work properly.
Plug your Fire TV Stick into an available HDMI port on your TV. If your TV has more than one HDMI
port, remember the number of the port you used to connect your Fire TV Stick.
If needed, you can use the included HDMI extender to make sure your Fire TV Stick fits securely into your TV. The
HDMI extender may also improve your Wi-Fi connection. Plug your Fire TV Stick into the HDMI extender and then
plug the HDMI extender into an available HDMI port on your TV.
Turn on your TV and select the HDMI input channel for the port you used to connect your Fire TV Stick.
Set up your remote. To remove the battery door and insert the included 2 AAA batteries:
It can take a considerable amount of pressure to open the battery door.
Amazon Fire TV Remote (included with Fire TV Stick)
Rotate the Fire TV Remote so the top edge is facing downwards.
61