Download Print this page

Doss ZD99 Instruction

Temperature controlled soldering iron

DOSS Temperature Controlled Soldering Iron

Rating: 220-240Vac 50Hz 48W Class I

Approval No. TUV023854EA

Features

This soldering station is an ideal entry level soldering station for hobbyists.

Heater: Mica, 150°C-480°C( 48W) , 150°C-520°C(58W)

Temp. Control: Rotary setting by knob

On first time use the soldering iron may produce smoke, this is just grease used in manufacturing burning off.

It is normal and should only last for approx. 10 minutes. It is not harmful to the product or user.



Always keep tips coated with tin to ensure a long service life.



Do not keep the iron at high temperature for a long time



Never clean the tip with coarse materials



Never cool it in water.

Model：ZD99

Table of Contents

Do you have a question about the ZD99 and is the answer not in the manual?

Page 1 DOSS Temperature Controlled Soldering Iron Model：ZD99 Rating: 220-240Vac 50Hz 48W Class I Approval No. TUV023854EA Features This soldering station is an ideal entry level soldering station for hobbyists. Heater: Mica, 150°C-480°C( 48W) , 150°C-520°C(58W) Temp. Control: Rotary setting by knob Attention On first time use the soldering iron may produce smoke, this is just grease used in manufacturing burning off.
Page 2  Remove the tip and clean every twenty hours of use, or at least once a week, and remove any loose build up in the barrel.  Do not use fluxes containing chloride or acid. Use only rosin or activated resin fluxes. ...
Page 3  If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Note: This instruction is also available to download from the distributor’s website: www.doss.com.au.