Advertisement
Setp9: The receiving messages will be shown on the list, and users can use the button
"Send" to send a CAN message. Use "SaveToFile" to save the receptions. In this
case, uncheck the "Show message on the list" to improve the efficiency of the
WinPAC.
Step10: Users can download and run the demos for default firmware on the WinPAC.
You can find them in the CD. The path is shown as follows:
CAN/SlotModule/ I_8120W/Demos/For_Default_Firmware/WinPAC
I-8120W Quick Start User Guide (Version 1.2, Apr/22/2015) -----4
Advertisement
