Amperes RP1104 Instruction Manual

Precision Design, Absolute Confidence
Introduction
Thank you for selecting MatriMix System, a small scale matrix system that is suitable for installation in clubs,
offices, residential as well as shopping centres.
RP1104 is a remote zone controller with sensor touch buttons which allows the user to select input music
source, volume and tones. It shall be installed at remote location at individual zone and connected to the
MxP2288 controller via Cat5e / 6 UTP cable.
Power source 24V DC via MxP2288
Power consumption 100 mA
LCD panel 3.5" resistive touch screen
Communication RS485 ; 19.2 Kbps
Controls Volume / BGM source / tone controls / channel select
Cabling Cat 5e / 6
Distance Up to 500m
Dimensions (WxH) 86 x 86 mm
Color White
Weight 100 g
Guide to Installation:
1 : Cut the wall hole or using Back Enclosure
72 mm
WALL
72 mm
2 : Cable Connection - Connect the cable to the jack located at the rear of the controller
RP1104
Remote Zone Control Panel
Made In Malaysia
+V -V A+ B-
24V DC RS485
2 pair screen cable
3 : Install RP1104 to Back Enclosure
RP1104 can be installed directly to the
partitioned wall, with the hole size as
shown.
WALL
AB (RS485)
24V DC
Back enclosure - surface or wall concealed
MatriMix Remote Zone Control Panel
or
EM / AC
CONT (NO)
Back Enclosure
24V DC IN ; 1 A
+ -
24V DC
Note: Ensure current capacity is sufficient for several units
of RP1104.
Instruction Manual
If it is to fit at brick wall, use the
specially design back
surface or concealed versions are
available.
AB (RS485)
CONFIGURABLE REMOTE TRIGGER
CH1 CH2 CH3 CH4
RS485 REMOTE REMOTE
A B PANEL 1 PANEL 2
MESSAGE PLAYER
IN ( LINE BAL )
EP1200 REMOTE ETHERNET
CONNECTION PAGING MIC PORT
www.ampereselectronics.com
RP1104
enclosure,