Ptcrb Approval; Fcc Compliant; Sar Information - MTX -GATEWAY User Manual

Table of Contents

Advertisement

1. PTCRB Approval

PTCRB is the regional approval needed in North American Market.
MTX-Gateway is now PTCRB Certified:
Request #: 39216
Manufacturer: Matrix Electronica
Model #: MTX-Gateway
Technologies and Frequency Bands: GSM 850/900/1800/1900, UMTS FDD: Band I/Band II/Band V/
Band VIII
FCCID: QIPEHS6
Industry Canada #: 7830A-EHS6
IMEI TAC: 35888405
Hardware Version: 1.12
Software Version: 02.000
SVN: 08
NAPRD.03 Version: GSM Test: 5.15/OTA Performance Test: 5.15

2. FCC Compliant

MTX-Gateway 3G and any variants contain FCC ID: QIPEHS6.
Certification for the EHS6 Module is listed under the FCC identifier QIPEHS6.
Industry Canada Certification Number: 7830A-EHS6 granted to Gemalto M2M GmbH.
The Cinterion reference application of the EHS6 Module registered under the above identifier is certified
to be in accordance with the following Rules and Regulations of the Federal Communications Commission
(FCC). Power listed is ERP for Part 22 and EIRP for Part 24. It is compliant with FCC regulations.
Equipment class: PCS Licensed Transmitter.
Notes: Quad band GSM/GPRS Modem.

2.1 SAR information

Cinterion Wireless Modules models: EHS6 is marketed without a defined antenna.
The Maximum Antenna Gain when using indoor antennas depends on the distance from the antenna to
any nearby persons when in normal operation. It should not exceed the values shown on the table below.
MTX-Gateway | 2019/4
MTX © by MATRIX ELECTRONICA S.L.U.
SUPPORT: iotsupport@mtxm2m.com | SALES: info@mtxm2m.com |
The FCC Equipment Authorization
mtxm2m.com
49

Advertisement

Table of Contents
loading

Table of Contents