Advertisement
INSTALLATION
Installing the 2 Mirror Hangers
2
Mark
Wall Anchor
A. Using a 1/8" drill bit, drill holes at each locations marked
on the wall surface.
B. Insert wall anchors into drilled holes completely.
C. Using screws provided with the mirror hangers, attach the
2 mirror hangers to wall anchors.
Adjust Mirror Angle
4
Always tighten set screws on metal parts with Allen wrench once your desired mirror angle is achieved.
Allen Wrench
Set Screw
Clean glass with household glass cleaner. Retain this sheet for future reference.
Mirror Hanger
Screw
Hanging the Mirror
3
Attach
m
etal arts onto axles on the sides of the
p
cap end of
m
etal art against
p
p
arts with
m
irror to hang the
Allen Wrench
-
2
of 2 -
Mirror
Cap End
Axle
m
m
irror angers. By holding
h
m
irror to
m
irror angers on the wall.
h
Set Screw
Mirror
Hanger
Metal Part
irror with the
m
etal
Advertisement
