Connecting To A Computer - FujiFilm SX801 Owner's Manual

Installation and Connection

Connecting to a Computer

1
Connect the supplied plug to the power cable and plug the cable into the
camera power connector.
4
Use only DC 12 V power.
CAUTION
b
Customers must supply their own power cable.
TIP
2
Use an Ethernet cable to connect the camera to a computer.
3
Select LAN ONVIF by setting DIP switch B to "ON" and DIP switches A , C
and D to "OFF".
• For information on connecting control units or remote-control mounts, see the Command List.
b
TIPS
• For information on using control units or remote-control mounts, see the documentation provided with the device.
8
1 2 3 4 5 6 7 8