Launching The Software - FujiFilm SX801 Owner's Manual

Viewing and Recording the Live Feed

Launching the Software

1
Turn on the camera and computer.
2
Double-click "SX801 Video Manager.exe" to launch the software.
A login dialog will be displayed.
3
Enter a user name, password, and client IP address.
The default IP address is "192.168.1.10".
USER NAME :
PASSWORD :
CONFIRM PASSWORD :
IPv4 ADDRESS :
First launch: Enter a new user name and password as desired.
• Choose a password 8 to 15 characters long. Take all steps necessary to protect the password.
• After 10 failed attempts, password entry will lock. The camera must then be re-initialized in stand-alone mode as de-
scribed below.
Note that this deletes all existing accounts.
A Turn the camera off .
b
B Select stand-alone mode using the DIP switches on the rear control panel (page 7).
TIPS
C Turn the camera on.
D Press and hold the OK/MENU button on the rear control panel for 3 seconds to display the menus.
E Select IP ADDRESS SETTINGS RESET in the setup menu.
F Turn the camera off and return to Step 3 of "Connecting to a Computer" (page 8).
Note: For more information, see the Owner's Manual: Stand-Alone Mode.
4
Click LOGIN.
The live feed from the camera will be displayed.
ADMINISTRATOR
SHOW PASSWORD
OK CANCEL
IPv4 ADDRESS
OK
Subsequent launches: Enter the existing user name and pass-
word.
10
SHOW PASSWORD