Airlink101 AICN1747W User Manual page 39

Wireless n night vision pan/tilt network camera

Hide thumbs Also See for AICN1747W:

Table of Contents

Event Configuration >> Schedule Trigger

You can separately configure the schedule for trigger function of the camera by Email, or FTP. Select the

Enable option on each item, and then select a Schedule Profile from the pull-down list and set the

Interval time.

Event Configuration >> GPIO Trigger

Select the Enable option to enable the GPIO trigger function of the camera, so that you can set Trigger

Out function or send captured images within the detecting area to the FTP server or email receiver. You

have to configure corresponding settings, such as FTP server and email server, to enable this feature.

- Schedule Profile: Select a schedule profile from the pull-down list.

- Action: Set the Trigger Out function or select the destination of the captured images: Send Email,

or FTP Upload.

- 38 -

Table of Contents

Skyipcam1747w