Table of Contents
Advertisement
3.3 Viewing Images
Method A > Access Camera from SkyIPCam Utility
Step 1A
Open Airlink101 SkyIPCam Utility, select the camera you wish to connect to and click on Link
button. Go to Step 3.
Method B > Access Camera from Web Browser
Step 1B
If you assigned a static IP address for your camera (at Step 6, Chapter 3.2), you may open the
Web Browser on your computer.
Type the IP address of your camera in the Address bar, and press Enter.
Step 2B
Step 3
Enter administrator's username and password of the camera, then click OK. The default
username and password are both "admin" if you did not make any change to it at Step 5, Chapter 3.2.
- 16 -
Advertisement
Table of Contents
