Table of Contents
Advertisement
The descriptions of every setting in this menu will be given below:
Item
Network Type
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
AV Control Port
HTTP Port
Click 'Apply' to save settings and make the new settings take effect.
Description
This camera can obtain the IP address from DHCP server
automatically (i.e. Router), or set a fixed IP address. Select
'DHCP' to obtain IP address automatically or 'Static IP Address'
to assign this IP camera with a fixed IP address.
'DHCP' is enabled by default, so it is suggested to run the
ConnectSky™ Wizard to locate the camera and then assign a
fixed IP address to it.
Specify the IP address for this IP camera here. The camera's
default IP address is '192.168.2.240'.
Specify the subnet mask for this IP camera here.
Specify the gateway address of the local network here.
Specify the IP address of DNS server here. Please input IP
address only. If you don't know the address of DNS server, ask
network administrator or your ISP for help.
Specify the IP address of backup DNS server here. When
primary DNS is unreachable, IP camera will use the IP address
specified here as DNS server.
This field is optional.
Specify the port number of video transfer here. If you have
firewall on your network, you need to allow computers on
Internet to access this port number of the IP address of IP
camera, or you'll not be able to view video from Internet.
Specify the port number of web management interface here. If
it's not 80, you'll have to add ':port' after the IP address /
hostname of this IP camera.
For example, if the HTTP port number you specified here is 90
and the IP address of IP camera is 10.20.20.30, then you have
to input 'http://10.20.20.30:90'
in the address bar of Internet explorer.
Advertisement
Table of Contents
