Advertisement
Cleaning instructions
To ensure optimal performance of the unit, cleaning has to be carried out at regular intervals.
Dirty unit may cause malfunction and you may see error code "H99". Please consult authorised
dealer.
• Switch off the power supply and unplug before cleaning.
• Do not touch the aluminium fi n, sharp parts may cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap (
• Do not use water hotter than 40 °C.
Remove Air Filter
1 1
Press the knobs.
Press the knobs.
2 2
Slowly pull
Slowly pull
down the
down the
intake grille.
intake grille.
3 3
Remove the air
Remove the air
fi lter from the
fi lter from the
tabs and pull it
tabs and pull it
downwards.
downwards.
For seasonal inspection after extended non-use
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• After 15 minutes of operation, it is normal to have the
following temperature difference between air inlet and
air outlet vents:
8
pH 7) or neutral household detergent.
Vacuum, wash and dry.
• lt is recommended to clean the air
fi lter every 6 weeks.
• Do not operate without an air fi lter.
• Wash/rinse the air fi lter gently with
water to avoid damage to the air fi lter
surface.
• Do not dry the part with a hair dryer
or a stove.
• Replace any damaged air fi lters.
COOL: ≥ 8 °C
HEAT: ≥ 14 °C
INDOOR UNIT
Wipe the unit gently
with a soft, dry cloth.
Remove
Remove
AIR FILTER
For extended non-use
• Activate HEAT mode for 2~3 hours to
remove moisture left in the internal parts
thoroughly to prevent mould growth.
• Turn off the power supply and unplug.
• Remove the remote control batteries.
Air Filter Installation
1 1
Insert the air
fi lter to the tabs
of the intake
grille.
2 2
Slowly bring
up the
intake grille.
3 3
Knob
Press the knobs to the
CLOSE side.
Advertisement
